What Should You Pay Attention to When Using a Wall-Mounted Heating Stove?

1. Generally, the water pressure inside the wall-mounted heating furnace will keep changing. We need to replenish it every month or so. This can be done from the replenishing valve. If the internal water pressure is too high, it needs to be drained. Drain excess water from the exhaust valve.

2. After setting up the antifreeze function, you must ensure that the water, electricity, and gas in your home are sufficient and smooth. To prevent accidents, after setting up antifreeze, you should also check the water pressure and working condition of the boiler regularly, and turn off the main tap water valve to ensure nothing goes wrong.

3. Be sure to write down the type of gas on the product label of the wall-mounted heating stove. Natural gas, liquefied petroleum gas and other gases cannot be used universally. If you use one type, you can only use this type in the future. You cannot change the gas at will, which may cause danger. ACCIDENT.

4. What are the precautions for using wall-mounted boilers? Wall-mounted heating stoves are best installed in the kitchen or on a closed balcony. They should not be exposed to direct sunlight. It is not recommended to install them in the bathroom.

5. In the freezing environment below zero degrees Celsius in winter, do not turn off the wall-mounted heating furnace casually. Always ensure that the wall-mounted heating furnace is powered on with electricity and gas to prevent the wall-mounted heating furnace from freezing. It is best to drain the water from the heating system and wall-mounted boiler if they are not used for a long time in winter.

6. When the wall-mounted heating boiler has not been used for a long time and the pipes are frozen or may freeze, do not open the wall-mounted heating boiler to ignite, as this may cause an explosion accident.